Fiber Optic Cross Cabinet GXF-A

ABS type PLC splitter fiber optic cross cabinet is a fiber optic cross cabinet set with ABS type fiber optic PLC splitter. It can be made of stainless steel or SMC (glass fiber reinforced unsaturated polyester plastic) material. For the detail please refer to the introduction.

The fiber optic cross cabinet is an interface device used for the connection of the main fiber optic cable and the distribution fiber cable in the fiber optic cable access network. After the cable is introduced into the fiber optic cross cabinet, with fixing, terminating and distributing of fiber, the trunk layer fiber cable and the distribution layer fiber cable are connected with each other.
Product Specification:
Material: SMC
Max Capacity: 1152Cores
Description: 1:32 ABS type PLC splitter 6-40PCS

 

Product Feature:
1. Long service life, aging-resistant, and radiation resistance.
2. The surface does not need any protection, it has the capability of all-weather protection.
3. The cabinet body is very thick, so it has a good heat insulation performance, and can prevent the water vapor from condensing effectively.
4. The door of the cabinet uses a special sealing door seal, waterproof door lock and three-point door pin lock, which make it's safe and reliable, good sealing.
5. With 12-cores splice wiring integrative module.
6. Can be installed with FC, SC fiber optic adapter.
7. With reliable fixing device and ground protection installation
8. Suitable for single core and ribbon optical fiber cable.
9. According to the different use way, it can be designed to be inserted with card type fiber optic PLC splitter or ABS type fiber optic PLC splitter.

Technical Parameters:
1·Nominal work wave-length:850nm,1310nm,1550nm,Fiber Optic Connect Cabinet
2·Operating temperature: -5°C~+40°C.Fiber Optic Connect Cabinet
3·Storage temperature:-40°C~+70°C.Fiber Optic Connect Cabinet
4·Relative humidity:≤85%(30°C).Fiber Optic Connect Cabinet
5·Atmospheric pressure:70~106KPa.Fiber Optic Connect Cabinet
6·Insertion loss:≤0.2dB.Fiber Optic Connect Cabinet
7·Return loss:≥45dB(PC),≥50dB(UPC),≥60dB(APC).Fiber Optic Connect Cabinet
8·Isolation resistance:≥1000MΩ/500V(DC)          Fiber Optic Connect Cabinet
9·Durability:>1000times.Fiber Optic Cross Connect Cabinet.Fiber Optic Cross Connect Cabinet
10·Anti-voltage strength:≥3000V(DC)/1min
11.Dimension:1450*760*340(Base high350)
12.Max.Core:288cores
13.Material:SMC
Product Application:
1.Widely used in FTTH (Fiber To the Home) access network
2.Telecommunication Networks
3.CATV Networks.Fiber Optic Cross Connect Cabinet.Fiber Optic Cross Connect Cabinet
4.Data communications Networks
5.Local Area Networks
6.Suitable for Telekom UniFi

Hot Tags: Fiber Optic Cross Cabinet GXF-A, China, manufacturers, suppliers, factory, wholesale, customized